Skip to main content

Focus - PC Based CNC Control System

In April of this year we released GCode Sender 4-Axis, a software that will continue the course of our old GCode Sender. However, because our new software has started to acquire features that completely separate it from the classic GCode Sender, we decided to change its name.

Our new PC based CNC control software from today goes by the name Focus, continues to be compatible with GRBL Firmware and has all the features that its previous version had.


Popular posts from this blog

End of Support for the "classic" GCode Sender

The course of SourceRabbit GCode Sender began in 2015 when Nikos Siatras ( GitHub , Twitter ), CEO of SourceRabbit, decided to build the controllers of the company's CNC machines, on the GRBL firmware. From 2015 until 2021, the GCode Sender was improved and acquired new features that were fully compatible with the CNC machines we manufacture. At the beginning of 2021 we started to build a new multi-axis software, GCode Sender 4-Axis , which replaced the "classic" GCode Sender and which we will fully support from now on. The source code of the classic GCode Sender will remain available on GitHub for everyone who wants to see or use the code but unfortunately we will stop supporting it.

GCode Sender 4-Axis Launched

After our engagement with GRBL for ESP32 we decided to expand the capabilities of our GCode Sender and create a new control software for 4-Axis CNC Machines. Our new GCode Sender 4-Axis , which is now available for purchase through our website, replaces our old 3-axis software, is fully compatible with the classic 3-Axis GRBL for AVR, the new Grbl_Esp32 and of course the SourceRabbit 4-Axis CNC Motherboard . We plan to implement many new tools and features to the GCode Sender 4-Axis. On our next update we will add a new better User Interface (UI). Stay tuned.

SprutCAM 4-Axis GRBL Post Processor for Free

We have developed our own post processor for SprutCAM software, which is fully compatible with our SourceRabbit GCode Sender. Since today (2021-04-20) you can download the SprutCAM 4-Axis GRBL post processor for free from our website's downloads section. You can find the SprutCAM 4-Axis GRBL post processor under the Help Section on our website